Full Flashing With Rollis
So you've decided to use Rollis - good chocie! Unzip the Rollis file to your desktop, it will look like a bunch of Bananas. Now connect the flasher cable to your computer and choose the correct end for your phone. Now connect the phone to the cable (33xx,33xx,8xxx will need removal of the battery to insert the cable). Now unzip the correct full flash file for your phone to the desktop. Start Rollis. It will look like this:
Choose your phone model from the drop down menu on the right-hand side of the Rollis window. Now click the First Green Button on the Rollis window to read your phone
.
It will take a few minutes to read your phone (you can watch its progress at the bottom of the window). When it has finished reading your phone it will ask you where to save the information, give a suitable name like '3310backup' and save the file. Now go to the file menu of Rollis and click open, go to the dektop and choose the flash file which you downloaded for your phone. You are now ready to write the flash. Click the Red button in Rollis. This will start the flash erasing than after the erasing has finished it will say 'Sending Flash To Phone', you can watch its progress at the bottom of the Rollis window. After Rollis has finished you will need to download EEPROM Tools from http://www.b-phreaks.co.uk and connect your phone to a datacable, Run B-Phreaks EEPROM Tools and click the Magnifying Glass, this will update your FAiD (stops the phone from reseting every 30secs, you may need click several times). Now click the Padlock to unlock the phone.
YOUR PHONE HAS NOW BEEN FULLY FLASHED!